Product Description
Where a special speed limit applies to trucks or other vehicles, the legend TrucksXX or such similar legend shall be shown on the same panel as the Speed Limit sign or on a separate R2-2 sign below the standard legend.
At least once every 5 years, States and local agencies should reevaluate non-statutory speed limits on segments of their roadways that have undergone a significant change in roadway characteristics or surrounding land use since the last review.
No more than three speed limits should be displayed on any one Speed Limit sign or assembly.
When a speed limit is to be posted, it should be within 10 km/h or 5 mph of the 85th-percentile speed of free-flowing traffic.
For speeds 25 MPH and under an 18x24 Speed Limit sign should be used. If the speed is greater than 25 MPH a 24x30 Speed Limit sign should be used.
Speed Limit signs are manufactured with .080 aluminum and are available with the following reflective sheeting options:
1. High Intensity Prismatic reflective (HIP) - 10 year warranty
2. Diamond Grade reflective sheeting (DG) - 12 year warranty
- Sign graphics are applied with translucent inks, vinyl, or translucent film
- Weather-resistant traffic grade aluminum will not rust or crack
- Manufactured to last for years outdoors
- These signs will mount directly on a post, wall, or fence
- Sign will resist fading
- Pre-punched 3/8" mounting holes. (Top & Bottom)
- Sign meets MUTCD specifications for federal highway use